[. . . ] Disconnect the appliance from the mains as soon as a fault is detected. Any repairs, such asreplacing a damaged power cable, may only be carried out by our Customer Services team in order to avoid potential danger. The T DISC, the piercing unit and the beverage outlet may be very hot immediately after brewing. [. . . ] The displays/buttons for drink intensity, drink temperature and drink size are flashing. Smooth out the foil of the T DISC with your finger so that the bar code can be read. The brewing unit is not Clean the brewing unit with a soft, damp cloth, Paying particular attention to the lid area. The appliance was not Check that the appliance is plugged into the plugged in when the power supply before inserting the T DISC. The piercing unit and/or the T DISC support have not been correctly inserted. Press the piercing unit into its holder using both thumbs and check the position of the T DISC support. Place the T DISC with the printed side facing downwards so that the tab is resting in the intended slot. The brewing unit is not Clean the brewing unit with a soft, damp cloth, Paying particular attention to the lid area. Only open the brewing unit when the status display Y has stopped flashing and remains lit continuously. Fill water tank R lights up even though there is enough water in the water tank. Fill water tank R and Descale Q are flashing simulta neously and it is not possible to prepare drinks. Descale Q lights up or starts flashing even though decalcified water has been used. The T DISC has not Wait until the brewing stage has come to Remove the T DISC and clean the b rewing unit. Press the piercing unit into its holder using both thumbs (until an audible click is heard). The T DISC bar code provides the recommended volume for every beverage selected. Condensation may appear and is not caused by any fault with the appliance. Use the drink size buttons (N­N­O) to set your individual drink volume before you begin brewing. Reduced quantity: During the brewing process, press the Start/Stop button to interrupt this stage. [. . . ] En Guarantee The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee. [. . . ]